The third brake light is an essential safety device that alerts drivers of your vehicle’s presence. It may also assist a driver in slowing down or stopping if they cannot see your left and right brake lights.
The factory incandescent 3rd brake light bulb provides a soft glow that takes a moment to turn on. A modern LED upgrade offers instant response time, alerting other drivers of their presence ahead of them in the road.
💥See also: Subaru Brake Light Switch Replacement
Installation
Your 2011 Kia Sorento’s center brake light is the first line of defense when it comes to avoiding being rear-ended. This bulb also signals other drivers that you are slowing down or stopping by illuminated when applying pressure to the pedal.
This task is relatively straightforward and only requires the correct tools. Open your trunk lid and locate the bulb socket on top of the trunk just below where the housing meets with the rear deck lid. Rotate this socket about 1/4 turn counterclockwise before pulling out the old bulb straight out. Now insert a new 921 miniature wedge base bulb into this same socket to see if it lights up!
The most critical part of any automotive maintenance procedure is keeping your vehicle running safely and smoothly. Your braking system plays an integral role in keeping your car running efficiently, so make sure to maintain it regularly.
Wiring
The brake light switch is an electrical component that sends a signal to the lights in back when the driver presses the brake pedal. A broken or dirty switch may interfere with this transmission, so replacing it if you are experiencing brake light issues is recommended.
Your car’s brake lights alert other drivers of your slowing down and can help avoid accidents on the road. Make sure to replace any broken or worn out bulbs promptly for yourself and other road users’ safety.
When shopping for a replacement bulb for your Kia Sorento brake lights, be sure to find one that fits properly in your vehicle. Make sure the bulb has the appropriate wattage and voltage, and always double-check the size before purchasing any replacement bulbs.
Bulbs
Having the correct bulbs in your Sorento can make all the difference in keeping it on the road long enough to get you home safely. Not only will they improve nighttime visibility, reduce fuel consumption and save you money in maintenance expenses – especially with regard to headlights – but they will also enhance nighttime visibility even further.
Quality halogen bulbs offer the best light output and durability compared to their cheaper counterparts. If you have the money and desire, upgrade your old bulbs with LEDs; modern LED upgrades can improve safety while adding to the aesthetic appeal.
No need for costly tools or gadgets when replacing your old, dim incandescent light bulb with a brighter and more energy-saving model. The most important part of this task is selecting the proper bulb for your application – which means consulting your vehicle owner’s manual for specific bulb specs.
🚨You may be interested in: Jeep Gladiator 3rd Brake Light Replacement
Replacement
The third brake light or high-level brake lamp is an essential element in your car. It helps you avoid rear-end collisions with other vehicles by alerting them to your braking intentions.
The location of your high-level brake lamp depends on the make and model of your vehicle. Typically, it’s located either on top rear of trunk or on rear deck lid for some cars and trucks.
If your 2011 Kia Sorento third brake light has stopped working, replacing the bulb is an easy and non-technical task that doesn’t require any special tools or knowledge.
Once the bulb socket is located, rotate it 1/4 turn counterclockwise to release it from its housing. Remove the old bulb and push a new number 921 miniature wedge base bulb into its socket. You may also upgrade to a 921 LED third brake light for a brighter, more modern appearance.
📢Read also: Harley-Davidson Brake Light Switch Replacement